CROCHET CABLE CARDIGAN — TUTORIAL & PATTERN
Pattern Use & Copyright
This pattern is an original design by NAVI New York. Please do not copy, share, resell, or redistribute this pattern (in full or in part). If you share your work, I’d appreciate a tag or credit: @olga.levinski
⸻
Create a cozy, oversized cardigan with beautiful raised cable patterns using NAVI VALE Yarn.
This design features flowing, intertwined cables created with short rows, ribbed edges, and a relaxed silhouette.
The cardigan is worked sideways in separate panels, allowing you to customize the length and width.
⸻
MATERIALS
• Yarn: NAVI VALE Yarn — 12 skeins (42.3 oz / 1,200 g total) for S–M
• Crochet hook: 6 mm
• Stitch markers
• Measuring tape
• Scissors
• Yarn needle
⸻
FINISHED MEASUREMENTS
Size S–M Oversized (Sample)
Back:
• Width: Approximately 22.8 in / 58 cm (8 cable repeats)
• Length: 23.6 in / 60 cm
Front panels:
• Width: Approximately 8.7 in / 22 cm each (3 cable repeats)
• Length: 23.6 in / 60 cm
Sleeves:
• Width: Approximately 17-18 in / 43-46 cm (6 cable repeats)
• Length: 16 in / 41 cm
Neckline opening: Approximately 7.1 in / 18 cm (2 cable repeats, measured after assembly)
Size L–XL Oversized (Suggested)
Back:
• Width: Approximately 28.3 in / 72 cm (10 cable repeats)
• Length: 25.6 in / 65 cm
Front panels:
• Width: Approximately 11.4 in / 29 cm each (4 cable repeats)
• Length: 25.6 in / 65 cm
Sleeves:
• Width: Approximately 19.7 in / 50 cm (7 cable repeats)
• Length: 16.5 in / 42 cm
Neckline opening: Approximately 7.1 in / 18 cm (2 cable repeats, measured after assembly)
Sizing notes
• One complete cable repeat measures approximately 2.75 in / 7 cm.
• The cable fabric is stretchy, so finished measurements may vary slightly.
• The neckline opening may stretch during assembly. Two cable repeats measure approximately 5.5–5.9 in / 14–15 cm before assembly and approximately 7.1 in / 18 cm after assembly.
• Measurements are based on NAVI VALE Yarn and a 6 mm crochet hook.
• If using a different yarn or hook size, adjust the number of complete cable repeats to achieve your desired measurements.
• Always complete a full cable repeat before fastening off.
• The L–XL measurements are suggested adjustments based on the sample and have not been tested.
⸻
STITCHES & ABBREVIATIONS (US TERMS)
• ch — Chain
• sl st — Slip stitch
• hdc — Half double crochet
• hdc BLO — Half double crochet in the back loop only
• YO sl st — Yarn over slip stitch
• YO sl st BLO — Yarn over slip stitch in the back loop only
• st(s) — Stitch(es)
• rep — Repeat
• BLO — Back loop only
⸻
CONSTRUCTION NOTES
• The cardigan is worked sideways in separate panels: one back, two fronts, and two sleeves.
• The main cable pattern is worked in hdc BLO.
• The bottom ribbing and sleeve cuffs are worked in YO sl st BLO.
• Each ribbed section consists of 6 stitches.
• The cable pattern is created using short rows of different lengths.
• The foundation chain must contain a multiple of 8 stitches for the main pattern, plus 6 additional stitches for the ribbing.
• The cable pattern alternates directions to create a mirrored appearance.
Sample stitch counts:
Body panels: 64 main stitches + 6 ribbing stitches = 70 chains.
Sleeves: 48 main stitches + 6 ribbing stitches = 54 chains.
⸻
HOW TO WORK YARN OVER SLIP STITCH (YO SL ST)
- Yarn over.
- Insert your hook into the next stitch.
- Yarn over and pull up a loop.
- Pull the loop through the remaining 2 loops on your hook.
For YO sl st BLO, insert your hook into the back loop only.
⸻
HOW TO WORK HALF DOUBLE CROCHET (HDC)
- Yarn over.
- Insert your hook into the next stitch.
- Yarn over and pull up a loop. You should have 3 loops on your hook.
- Yarn over and pull through all 3 loops.
For hdc BLO, insert your hook into the back loop only.
⸻
JOINING THE STEPPED SECTIONS
The cable pattern creates small steps between short rows.
To create a smooth transition between these sections:
- Insert your hook under the vertical strand between the two rows at the step.
- Yarn over.
- Insert your hook into the back loop of the next stitch in the lower row.
- Yarn over and pull up a loop. You should now have 4 loops on your hook.
- Yarn over and pull through all 4 loops.

Continue working hdc BLO as instructed.
Repeat this technique whenever you reach a step between short rows.
⸻
PART 1 — BACK PANEL
The back panel is worked sideways. The foundation chain determines the cardigan’s length, while the cable repeats determine its width.
Size S–M Sample: Ch 70 (64 + 6).
Row 1 — Foundation Row
Ch 1.
Work 6 YO sl st into the back bumps of the foundation chain.
Work 64 hdc into the remaining back bumps.
Total: 70 sts.
⸻
PART 2 — CABLE PATTERN
The cable pattern consists of short-row sequences followed by full-length rows.
Row 2 — Cable Pattern Row 1
Ch 2, turn.
Work 8 hdc BLO.
Ch 2, turn.
Work 8 hdc BLO.
Ch 2, turn.
Work 6 hdc BLO.
Ch 2, turn.
Work 4 hdc BLO.

Ch 2, turn.
Work 14 hdc BLO, joining the stepped sections as you go.


Ch 2, turn.
Work 16 hdc BLO, joining the stepped sections as you go.

Ch 2, turn.
Work 14 hdc BLO.

Ch 2, turn.
Work 4 hdc BLO.
Ch 2, turn.

Main Cable Repeat
Continue repeating:
Step 1: Work 14 hdc BLO, joining the stepped sections. Ch 2, turn.

Step 2: Work 16 hdc BLO, joining the stepped sections. Ch 2, turn.

Step 3: Work 14 hdc BLO. Ch 2, turn.
Step 4: Work 4 hdc BLO. Ch 2, turn.
Continue until 8 main-pattern stitches and 6 ribbing stitches remain.
Total remaining: 14 sts.

Completing Cable Pattern Row 1
Work 14 hdc BLO, joining the stepped sections.
Work 6 YO sl st BLO.

Ch 1, turn.
Work 6 YO sl st BLO.
Work 16 hdc BLO.

Ch 2, turn.
Work 14 hdc BLO.
Ch 2, turn.
Work 4 hdc BLO.
Ch 2, turn.

Work 6 hdc BLO.
Work 6 YO sl st BLO.
Ch 1, turn.
Work 6 YO sl st BLO.
Work 8 hdc BLO.
Ch 2, turn.
Work 8 hdc BLO.
Work 6 YO sl st BLO.

End of Row 2.
⸻
Row 3 — Cable Pattern Row 2
Ch 1, turn.
Work 6 YO sl st BLO.
Work 1 hdc BLO in each stitch across the main section, joining the stepped sections as you go.

Continue until you have worked 64 hdc BLO.
Total: 70 sts.

⸻
Row 4 — Cable Pattern Row 3
Ch 2, turn.
Work 64 hdc BLO across the main section.
Work 6 YO sl st BLO.
Total: 70 sts.

This row prepares the fabric for the next cable repeat and creates a mirrored appearance.
⸻
PART 3 — MIRRORED CABLE PATTERN
The next cable section is worked in the opposite direction, starting with the ribbing.
Mirrored Cable Pattern Row 1
Work 6 YO sl st BLO.
Work 8 hdc BLO.
Ch 2, turn.
Work 8 hdc BLO.
Work 6 YO sl st BLO.
Ch 1, turn.
Work 6 YO sl st BLO.
Work 6 hdc BLO.
Ch 2, turn.
Work 4 hdc BLO.
Ch 2, turn.

Work 14 hdc BLO, joining the stepped sections.

Ch 2, turn.
Work 16 hdc BLO.
Work 6 YO sl st BLO.
Ch 1, turn.
Work 6 YO sl st BLO.
Work 14 hdc BLO.
Ch 2, turn.
Work 4 hdc BLO.
Ch 2, turn.

Main Cable Repeat
Continue repeating:
Step 1: Work 14 hdc BLO, joining the stepped sections. Ch 2, turn.
Step 2: Work 16 hdc BLO, joining the stepped sections. Ch 2, turn.
Step 3: Work 14 hdc BLO. Ch 2, turn.
Step 4: Work 4 hdc BLO. Ch 2, turn.
Continue until 8 pattern stitches remain.
Completing the Mirrored Cable Row
Work 14 hdc BLO.

Ch 2, turn.
Work 16 hdc BLO.
Ch 2, turn.
Work 14 hdc BLO.
Ch 2, turn.
Work 4 hdc BLO.
Ch 2, turn.

Work 6 hdc BLO.

Ch 2, turn.
Work 8 hdc BLO.
Ch 2, turn.
Work 8 hdc BLO.
End of mirrored cable row.

Work the following full-length row using 64 hdc BLO and 6 YO sl st BLO (row 3).
Then work another full-length row to prepare for the next cable section (row 4).

⸻
PART 4 — REPEATING THE PATTERN
Continue alternating the regular and mirrored cable sections (row 2), with two full-length rows between them (rows 3 and 4).
Repeat until the back panel reaches your desired width.
Sample: 8 cable repeats, approximately 22.8 in / 58 cm.

Fasten off.
⸻
PART 5 — FRONT PANELS
Make 2.
Work both front panels using the same foundation chain and cable pattern as the back panel.
Ch 70.
Work 3 cable repeats for each front panel.

Finished width: Approximately 8.7 in / 22 cm.
Leave 2 complete cable repeats on the back panel for the neckline opening.
⸻
PART 6 — JOINING THE SHOULDERS
Place the front panels against the back panel.

Align the shoulder edges, making sure the cable patterns match.
Leave the desired opening for the neckline.
Secure the panels with stitch markers.
Join the shoulder seams using sl st, working through the corresponding edge stitches of both panels.

Repeat on the opposite shoulder.

⸻
PART 7 — SLEEVES
Make 2.
Try on the assembled body and measure your desired sleeve length before starting.
Sample:
Sleeve length: 16 in / 41 cm.
Sleeve width: Approximately 18 in / 46 cm.
Foundation: Ch 54 (48 + 6).
Row 1 — Foundation Row
Ch 1.
Work 6 YO sl st into the back bumps of the foundation chain.
Work 48 hdc into the remaining back bumps.
Total: 54 sts.
Continue working the same cable pattern as the body panels, alternating regular and mirrored sections.
Work until the sleeve reaches the desired width.
Sample: 6 cable repeats.

Make the second sleeve the same way.
⸻
PART 8 — ATTACHING THE SLEEVES
Lay the assembled body flat.
Measure half of the sleeve width from the shoulder seam along both the front and back panels.
Sample:
Sleeve width: 18 in / 46 cm.
Half: 9 in / 23 cm.
Measure 9 in / 23 cm from the shoulder seam in each direction and place stitch markers.

For my sample, 40 stitches remain from the bottom edge to the sleeve attachment point on both the front and back.
This leaves 60 stitches across the armhole opening.
With 6 cable repeats across the sleeve, each repeat is distributed over approximately 10 stitches along the body opening.
Place the sleeve against the right side of the body, aligning the center of the sleeve with the shoulder seam.

Secure with stitch markers, making sure the cable pattern is evenly distributed.
Join using sl st, inserting your hook through the edge stitch of the sleeve and both loops of the corresponding body stitch.


Repeat for the second sleeve.
⸻
PART 9 — SIDE AND SLEEVE SEAMS
Turn the cardigan inside out.
Fold each sleeve in half and align the sleeve and body edges.
Secure with stitch markers.
Join using sl st, working through the corresponding edge stitches.
Continue from the sleeve cuff, along the underarm, and down the side of the cardigan.


Repeat on the opposite side.
⸻
PART 10 — FRONT AND NECKLINE BAND
The front and neckline band is worked continuously using YO sl st BLO.
Row 1
Attach the yarn at the bottom corner of one front panel.
Ch 1.
Work YO sl st BLO evenly along the first front edge, around the neckline, and down the second front edge.
Sample:
• First front edge: 70 YO sl st BLO
• Neckline: 30 YO sl st
• Second front edge: 70 YO sl st BLO
Total: 170 sts.
Adjust the stitch distribution as needed to keep the band flat.
Row 2
Ch 1, turn.
Work YO sl st BLO across the entire row.
Following Rows
Repeat Row 2 until the band reaches your desired width.

Sample: 6 rows, approximately 2 in / 5 cm.


Fasten off and weave in the ends.
⸻
PART 11 — FINISHING
Once the cardigan is complete:
- Weave in all yarn ends.
- Gently block the cardigan according to the yarn care instructions.
- Lay flat and shape to the desired measurements.
- Allow to dry completely.
Blocking helps even out the stitches and define the cable pattern.
⸻
CUSTOMIZATION
Length: Adjust the foundation chain using a multiple of 8 stitches for the main pattern, plus 6 stitches for the ribbing.
Width: Add or remove cable repeats to achieve your preferred fit.
Sleeves: Adjust the foundation chain for length and the number of cable repeats for width.
Front band: Add more rows of YO sl st BLO for a wider finish.
⸻
FINISHED!
Tag your finished project @olga.levinski. We’d love to see your creation!